# Auto-create Tests in Xray via Katalon TestOps/True Platform without manual ID mapping?

**URL:** <https://forum.katalon.com/t/auto-create-tests-in-xray-via-katalon-testops-true-platform-without-manual-id-mapping/194958>\
**Category:** Katalon True\
**Created:** [October 30, 2026, 4:34am UTC](https://forum.katalon.com/t/auto-create-tests-in-xray-via-katalon-testops-true-platform-without-manual-id-mapping/194958 "2026-10-30T04:34:08Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![ramiromarcos](https://dub1.discourse-cdn.com/katalon/user_avatar/forum.katalon.com/ramiromarcos/32/30227_2.png) [@ramiromarcos](https://forum.katalon.com/u/ramiromarcos)\
**Post date:** [October 30, 2026, 4:34am UTC](https://forum.katalon.com/t/auto-create-tests-in-xray-via-katalon-testops-true-platform-without-manual-id-mapping/194958/1 "2026-10-30T04:34:08Z")

</div>

Hi everyone,

I’m currently setting up the Katalon integration with Xray through Katalon TestOps (True Platform) and wanted to clarify how test synchronization works.

When uploading a standard `junit.xml` to Xray via its REST API, Xray automatically creates the corresponding Test issues in Jira if they don’t already exist.

Does the native Katalon TestOps–Xray integration support this same automatic test creation upon execution/push? Or does it strictly require existing Jira/Xray Test issues to be manually mapped/linked before pushing the results?

Any insights, workarounds, or documentation on handling this without manual pre-mapping would be greatly appreciated!

---

<div class="post-metadata">

**Author:** ![nghi.phan](https://dub1.discourse-cdn.com/katalon/user_avatar/forum.katalon.com/nghi.phan/32/30970_2.png) [@nghi.phan](https://forum.katalon.com/u/nghi.phan)\
**Post date:** [October 30, 2026, 4:47am UTC](https://forum.katalon.com/t/auto-create-tests-in-xray-via-katalon-testops-true-platform-without-manual-id-mapping/194958/2 "2026-10-30T04:47:38Z")

</div>

> [@ramiromarcos](#):
>
> I’m currently setting up the Katalon integration with Xray through Katalon TestOps (True Platform) and wanted to clarify how test synchronization works.

Hi Rami! Thanks for your question

The native Katalon TestOps/True Platform–Xray integration follows a different workflow from uploading a JUnit report directly to Xray. As documented, it pushes results for Katalon test cases already linked to Xray Test issues. The push can create a new **Test Execution** , but that is different from creating the individual **Test** issues.

If you’d like to avoid pre-mapping, you can keep uploading your `junit.xml` directly to Xray through its REST API as a separate CI/CD step, alongside sending results to Katalon. This bypasses the native connector, though it won’t automatically link the Xray Tests back to your Katalon test cases. Also check Xray’s test-matching rules to avoid duplicates across runs.

You can find the documented native workflow here: [Katalon Xray integration guide](https://docs.katalon.com/katalon-platform/integrations/alm-and-test-management/xray-integration).

Our Community will jump in and assist as well

Hope this helps

---

<div class="post-metadata">

**Author:** ![dineshh](https://dub1.discourse-cdn.com/katalon/user_avatar/forum.katalon.com/dineshh/32/24488_2.png) [@dineshh](https://forum.katalon.com/u/dineshh)\
**Post date:** [November 16, 2026, 4:17am UTC](https://forum.katalon.com/t/auto-create-tests-in-xray-via-katalon-testops-true-platform-without-manual-id-mapping/194958/3 "2026-11-16T04:17:25Z")

</div>

did you map `junit.xml` to Xray via its REST API Succesfully?
